Mixer
Output Power 5% THD
85W using one output jack 8Ω load
120W using one output jack 4Ω load
150W using both output jacks 8Ω per jack
200W using both output jacks 4Ω per jack
Accepted inputs
CH 1-5 Mic XLR balanced line 1/4 balanced/unbalanced
Playback RCA Line Level Stereo mixed mono
Frequency response 20HZ-20kHz (Actual response is tailored to speaker cabinet for accurate acoustical response)
Hum & Noise
-65dB Residual Noise all level controls 0% (minimum)
-50dB Nominal System Noise all level controls at 50%
System Gain (Measurements made at 1kHz)
+75dB Mic to speaker output (CH 1-5)
+60dB Line to speaker output (CH 1-5)
+35dB Playback to speaker output
+50dB Mic to preamp output (Insert Ring)
+50dB Mic to record out
+25dB Power amp in (Insert Tip) to speaker outputChannel EQ (Tone) 1 band 1.5kHz and above ±12dB Low frequencies not affected
Master EQ (Bass Mid Treble) 200Hz and below 1.5kHz centered 4kHz and above ±12dB
Effects Reverb
Phantom Power +15V Mic inputs (Ch 1-5)
Power requirements USA/Canada 120VAC/60Hz 400W nominal
Dimensions (H x W x D) 320mm x 226mm x 250mm 12.6 x 8.9 x 8.9
Weight 7.8kg 17.2lb.Speaker Cabinets
Speakers 2 X 6-1/2 50W 8Ω
Horn 5x2 fair with piezo driver
Power capacity 100W each cabinet RMS 200W each cabinet Peak music Power
Frequency response 50HZ-20kHz
Nominal impedance 4Ω
Dimensions (Per cab) (HxWxD) 478mm x 226mm x 250mm 18.8 x 8.9 x 8.9
Weight 8kg 17.6lb.